• Series FF:SBFF
    View Cart
    Details

    Series FF / SBFF

    To handle 1-1/4" or 1-1/2" I.D. booster hose or 1-1/2" or 1-3/4" I.D. collapsible hose.

    • Standard booster hose reel is steel, painted graphite. Aluminum or stainless steel construction is also available. • Super Booster (SBFF) polished aluminum construction reel weighs up to 30% less than standard booster reel. Prefix complete model number with "SB" when ordering. See Note 6 on page 11. • Gear-driven crank rewind is standard. Choose chain and sprocket drive powered by electric, hydraulic or compressed air motor. • Pinion brake standard. • Standard inlet: 1-1/2" 90° ball bearing swivel joint with 1-1/2" female NPT threads and 2" Victaulic® groove. • Flanged outlet riser. • Standard outlet: 1-1/2" male NST threads. (1.990" x 9 threads per inch.) • Consult factory for other sizes and/or threads. • Standard inlet, outlet riser, and hub assembly are steel (also available in stainless steel). • Rollers and roller mounting brackets are accessory items. Specify roller position. • Pressures to 600 psi (41 bar). • Temperatures from -20° F to +400° F (-29° C to +204° C). • Consult factory for other pressures and temperatures.

  • Series G2000
    View Cart
    Details

    Series G2000

    To handle dual 1/4" through 1/2" I.D. hose.

    • Two swivel joint inlets and two outlet risers to handle two equal lengths of hose. • Gear-driven crank rewind. • Pinion brake as standard. • Standard inlets: 90° ball bearing swivel joints, 1/2" female NPT threads. • Standard outlets: 1/2" female NPT threads. • Standard pressures to 3000 psi (207 bar), available up to 10,000 psi (690 bar) – must specify. • Temperatures from -40° F to +400° F (-40° C to +204° C). • For power rewind, see Series 2000, page 20. • Reels for use with oxygen/acetylene. See Series 2400 Hannay Reels Welding Catalog H0408-W.

  • GR&HGR
    View Cart
    Details

    Series GR / HGR

    To handle 1" I.D. hose.

    • Available with 1/8", 7 x 19 galvanized carbon steel cable. • 100 amp Alligator clamp. • Stainless steel or plastic-covered cable and “Y” branches are available at an additional charge. • Cable guide arm of cast aluminum and ZA-12 aluminum zinc alloy.

    Series GR75 • Sealed spring is a good economical choice that’s compact and lightweight.

    Series HGR • A non-sparking ratchet assembly. • Reels are repairable and parts are readily available. • Supplied with 18" long grounding strap with eyelet connectors on both ends.

  • Series_H16-14-16
    View Cart
    Details

    Series H16-14-16

    To handle 1/4" I.D. hose.

    • All steel construction. • Quality swivel joint. • Tension brake. • Equipped with one durable rubber twist tie for cable ends. • Manual rewind. • Standard pressure 5000 psi (345 bar).

  • seriesHDD6200
    View Cart
    Details

    Series HDD6200

    To handle single 3/4" through 1" I.D. hose.

    This reel is designed with external hose connection to allow tightening of hose connection without removing all hose from the spool. The optional hose guide arm along with the optional swivel base, allow precise payout of hose from the reel. • Direct drive hydraulic motor (no chain and sprocket maintenance). • 1" swivel joint with 1" FNPT threads. • Heavy-duty spool and frame design. • Steel hub assembly – rated to 3000 psi (207 bar). • Other models and capacities are available upon request.

    Options: • Swinging guide arm with roller and operator handle. • Rotating ball bearing swivel base. • Heavy-duty pin lock in base for locking in multiple locations. • 1" swivel joint with adjustable packing. • Available up to 6000 psi (414 bar) – must specify.

  • Series IV
    View Cart
    Details

    Series IV

    To handle single 1-1/4" I.D. through 2" I.D. hose.

    • Chain and sprocket drive powered by an electric, hydraulic, or compressed air motor. • Strap brake and air caliper brake are standard. • Standard inlet: 90° ball bearing swivel joint, 1-1/2" female NPT threads and 2" Victaulic® groove. • Optional 2" internals also available. • Standard outlet: flanged riser, 1-1/2" female NPT threads. • Standard: inlet, outlet riser, and hub assembly are steel. Options: also available in aluminum or stainless steel. • Standard pressures to 600 psi (41 bar). • Temperatures from -30°F to +250°F (-34°C to +121°C). • Consult factory for other pressures and temperatures.

  • Series IV5000
    View Cart
    Details

    Series IV5000

    To handle single 1-3/8" I.D. through 2" I.D. hose.

    • Effortless and fast rewinding, wrapping, guiding of hose. • Chain and sprocket drive powered by electric, hydraulic, compressed air motor. • Auxiliary crank rewind is optional. • 12 volt rewind; strap brake standard. Air brake optional. • 5100 Series - 90° ball bearing swivel joint, 1-1/2" female NPT threads, 2" Victaulic® groove, flanged riser with 1-1/2" female NPT threads. • 5200 Series - 90° ball bearing swivel joint, 2" Victaulic® groove, flanged riser with 2" female NPT threads. • Inlet, hub assembly is aluminum. • Joint and riser are ductile iron for petroleum fuel. • Standard: pressures to 600 psi (41 bar). • Temperatures from -30°F to +250°F (-34°C to +121°C). • Standard with a reduction unit only. Electric clutch units optional. • Consult factory for other pressures and temperatures.

  • Series LD Reels and Spools_installation1
    View Cart
    Details

    Series LD Reels and Spools

    Reels and spools to handle up to 6" I.D. collapsible hose.

    • Square tubing frames. • Heavy-gauge steel discs. • Drums are formed by reinforced tie rods with radial supports. • Pillow block ball bearings. • Chain and sprocket rewind with electric (12v or 24v) or hydraulic rewind motor. • Hydraulic caliper disc brake.

    Hydraulic Requirements

    • It is important that the end-user provide Hannay Reels with complete specifications as to the required operation of the large diameter reel being specified. Any speed and torque requirements MUST be known to properly specify the correct reel for the application. • Hannay Reels does not recommend specific brands for hydraulic system components. We suggest you work with your hydraulic component supplier to meet your specs.

    Custom Reels

    • The standard models listed represent the most frequently specified customer requirements for handling large-diameter fire hose. Because of the many possible variations in reel installation and hose capacity requirements, we will also custom build reels and spools to your specifications to become an integral part of the apparatus. Reels are built of steel construction, and various finishes are available.

    Important: Hose capacity is based on the flat hose dimensions listed below, with couplings at 100 foot intervals.

    Flat hose dimensions
  • Series N400
    View Cart
    Details

    Series N400

    To handle twin 1/4" or 3/8" I.D. welding hose.

    • Heavy-duty spring motor. • Non-sparking ratchet assembly. • Declutching arbor to prevent damage from reverse winding. • Standard inlets: 90° ball bearing swivel joints, 1/2" female NPT threads. • Standard outlets: male 9/16"-18 threads, right-hand for oxygen, left-hand for gas. • Pressures to 300 psi (21 bar). • Standard temperatures from --40° F to +400° F (-40° C to +204° C). • Type of gas used must be specified. • Hose stop is required. • 4-way roller assembly. SR position is standard, other configurations available, must specify.

  • Series N500
    View Cart
    Details

    Series N500

    To handle single 1/4" or 3/8" I.D. hose.

    • Compact frame and narrow base. • Non-sparking ratchet assembly. • Declutching arbor to prevent damage from reverse winding. • Standard inlet: 90° swivel joint, 1/4" female NPT threads. 3/8" female NPT threads are optional and must be specified. • Standard outlet: 1/4" female NPT threads. 3/8" female NPT threads are optional and must be specified. • Other threads can be furnished and must be specified. • Standard 1/4" pressure 10,000 psi (690 bar); Standard 3/8" pressure: 3000 psi (207 bar). Optional 3/8" pressure: 8000 psi (552 bar) – must specify. • Temperatures from -40° F to +400° F (-40° C to +204° C). • 4-way roller assembly. SR and VR roller positions: swivel joint is standard on the right. TR roller positions: swivel joint is standard on the left. Other configurations available, must specify. • Constant tension is available – consult factory.

  • View Cart
    Details

    Series N600

    To handle dual 1/4" through 3/8" I.D. sensing hose.

    • Narrow frame and compact mounting base. • Non-sparking ratchet assembly. • Declutching arbor to prevent damage from reverse winding. • Standard inlets: 90° full-flow swivel joints with Viton® seals, 1/2" female NPT threads. • Optional balanced pressure (BP) swivel joints are available upon request. Subtract 1-3/4" from “F” dimension. • Standard outlets: 1/2" female NPT threads. • Standard pressures to 3000 psi (207 bar). • Temperatures from -40° F to +400° F (-40° C to +204° C). • Consult factory for other pressures and temperatures. • 4-way roller assembly. SR position is standard, other configurations available, must specify.

  • Series N700
    View Cart
    Details

    Series N700

    To handle 1/4" through 1/2" I.D. hose.

    • Narrow frame and compact mounting base. • Non-sparking ratchet assembly. • Declutching arbor to prevent damage from reverse winding. • Standard inlet: 90° balanced pressure swivel joint, 1/2" female NPT threads. • Standard outlet: 1/2" female NPT threads. • Standard pressures to 3000 psi (207 bar), available up to 10,000 psi (690 bar) – must specify. • Temperatures from -40° F to +400° F (-40° C to +204° C). • 4-way roller assembly. • SR and VR roller positions: swivel joint is standard on the right. TR roller positions: swivel joint is standard on the left. Other configurations available, must specify. • Constant tension is available – consult factory.

  • Series N800
    View Cart
    Details

    Series N800

    To handle 3/4" or 1" I.D. hose.

    • Narrow frame and compact mounting base. • Non-sparking ratchet assembly. • Declutching arbor to prevent damage from reverse winding. • Standard inlet: 90° balanced pressure swivel joint, 1" female NPT threads. • Standard outlet: 1" female NPT threads. • Standard pressures to 2000 psi (138 bar), available up to 6000 psi (414 bar) – must specify. • Temperatures from -40° F to +400° F (-40° C to +204° C). • 4-way roller assembly. SR and VR roller positions: swivel joint is standard on the right. TR roller positions: swivel joint is standard on the left. Other configurations available, must specify. • Constant tension is available – consult factory.

  • Series NSCR700
    View Cart
    Details

    Series NSCR700 / SCR700

    To handle live electric cable.

    • Heavy-duty spring motor. • Non-sparking ratchet. • Declutching arbor. • Consult factory for constant tension applications. • 3-conductor, 45-amp, 600-volt collector assembly with #8 gauge wiring. • Double brushes per circuit. Brushes are copper graphite with copper alloy rings. • Additional con ductors or higher amperage (up to 300-amps) available; consult factory. • Silver collector available. • Supplied with a 4-way roller assembly. Roller position must be specified. • A cable stop should be used. • For vertical lift, stretch, and/or crane installation, consult factory for proper spring specifications.

  • Series PB
    View Cart
    Details

    Series PB / HDDPB

    To handle single 1" through 1-1/2" I.D. hose.

    • Standard hose reel is steel construction, painted graphite. Aluminum or stainless steel construction is available. • “SB” prefix denotes polished aluminum construction, offering both reduced weight and superior corrosion resistance compared to standard steel construction. • Series PB are explosion-proof reels. • Series HDDPB reel is direct hydraulic drive, eliminating the use of chain and sprockets. • Choose gear-driven crank rewind, #40 chain and sprocket drive powered by an electric, hydraulic or compressed air motor or direct drive hydraulic rewind motor. • Crank rewind reels and direct drive reels supplied with pinion brake. • Power rewind reels (chain and sprocket driven) supplied with a strap brake. Other brake and locking devices may be specified. • Standard inlet: 90° ball bearing swivel joint, 1-1/2" female NPT threads. • Standard outlet: flanged riser, 1" female NPT threads. Standard inlet, outlet riser, and hub assembly are steel. • Other sizes and/or threads can be furnished and must be specified. • Pressures to 350 psi (24 bar). • Temperatures from -40°F to +350°F (-40°C to +177°C). • Consult factory for other pressures and temperatures. • Chain guard available upon request, must be specified. • Rollers and roller mounting brackets are accessory items. Specify roller position.

     
  • Series PB
    View Cart
    Details

    Series PB / HDDPB

    To handle single 1" through 1-1/2" I.D. hose.

    • Standard hose reel is steel construction, painted graphite. Aluminum or stainless steel construction is available.
    • “SB” prefix denotes polished aluminum construction, offering both reduced weight and superior corrosion resistance compared to standard steel construction.
    • Series PB are explosion-proof reels.
    • Series HDDPB reel is direct hydraulic drive, eliminating the use of chain and sprockets.
    • Choose gear-driven crank rewind, #40 chain and sprocket drive powered by an electric, hydraulic or compressed air motor or direct drive hydraulic rewind motor.
    • Crank rewind reels and direct drive reels supplied with pinion brake.
    • Power rewind reels (chain and sprocket driven) supplied with a strap brake. Other brake and locking devices may be specified.
    • Standard inlet: 90° ball bearing swivel joint, 1-1/2" female NPT threads.
    • Standard outlet: flanged riser, 1" female NPT threads. Standard inlet, outlet riser, and hub assembly are steel.
    • Other sizes and/or threads can be furnished and must be specified.
    • Pressures to 350 psi (24 bar). • Temperatures from -40°F to +350°F (-40°C to +177°C).
    • Consult factory for other pressures and temperatures.
    • Chain guard available upon request, must be specified.
    • Rollers and roller mounting brackets are accessory items. Specify roller position.

  • Series PBGMB_PBGMT
    View Cart
    Details

    Series PBGMB / PBGMT

    To handle single 1" or 1-1/2" I.D. hose.

    • Standard hose reel is steel construction, painted graphite. Aluminum or stainless steel construction is available. • “SB” prefix denotes polished aluminum construction, offering both reduced weight and superior corrosion resistance compared to standard steel construction.

    Both Series

    • Choose #40 chain and sprocket drive powered by an electric, hydraulic or compressed air motor or direct drive hydraulic rewind motor. • Auxiliary crank rewind standard on Series HDDPB reels. Available on Series PB power rewind reels, at extra cost. • Direct drive hydraulic rewind reels supplied with pinion brake. Electric powered rewind reels supplied with a strap brake. • Other brake and locking devices may be specified. (See Ordering & Accessory Guide.) • Standard inlet: 90° ball bearing swivel joint, 1-1/2" female NPT threads. • Standard outlet: flanged riser, 1" female NPT threads. • Standard inlet, outlet riser, hub assembly are steel. • Other sizes and/or threads can be furnished and must be specified. • Pressures to 350 psi (24 bar). • Temperatures from -40°F to +350°F (-40°C to +177°C). • Consult factory for other pressures and temperatures. • Chain guard available upon request, must be specified.

     Series PBGMB • The Assembly B bottom wind roller is standard.

  • Series PBM
    View Cart
    Details

    Series PBM

    To handle single 1" through 1-1/2" I.D. hose.

    • Standard hose reel is steel construction, painted graphite. Aluminum or stainless steel construction is available. • “SB” prefix denotes polished aluminum construction, offering both reduced weight and superior corrosion resistance compared to standard steel construction. • Series PB are explosion-proof reels. • Series HDDPB reel is direct hydraulic drive, eliminating the use of chain and sprockets. • Choose gear-driven crank rewind, #40 chain and sprocket drive powered by an electric, hydraulic or compressed air motor or direct drive hydraulic rewind motor. • Crank rewind reels and direct drive reels supplied with pinion brake. • Power rewind reels (chain and sprocket driven) supplied with a strap brake. Other brake and locking devices may be specified. • Standard inlet: 90° ball bearing swivel joint, 1-1/2" female NPT threads. • Standard outlet: flanged riser, 1" female NPT threads. Standard inlet, outlet riser, and hub assembly are steel. • Other sizes and/or threads can be furnished and must be specified. • Pressures to 350 psi (24 bar). • Temperatures from -40°F to +350°F (-40°C to +177°C). • Consult factory for other pressures and temperatures. • Chain guard available upon request, must be specified. • Rollers and roller mounting brackets are accessory items. Specify roller position.

     
  • Series PW-2
    View Cart
    Details

    Series PW-2

    To handle single 3/8" or 1/2" I.D. hose.

    • Permanent direct crank rewind, with adjustable split bearing brake assembly. • Standard inlet: full flow swivel joint with 1/2" NPT fitting. • Standard outlet: 1/2" female NPT fitting, supplied with 1/2" MNPT to 3/8" FNPT reducing bushing. Other sizes and/or threads available, must specify. • Pressures up to 5000 psi (345 bar). Flow rate of over 12 gpm @ 15 fps. • Temperatures from +32° F to +400° F (0° C to +204° C). Consult factory for other temperatures. • Captive (4-sided) hose guide roller assembly. • Black powder coated finish. • Optional stainless steel construction and internals – consult factory.

  • Series RM
    View Cart
    Details

    Series RM

    To handle single 3/8" through 1/2" I.D. hose.

    • Heavy-duty 12v DC 1/3 HP electric reel. • Standard (“RM”) Models – Rewind only, hose is pulled out manually. • Optional (“RM-REV”) Models – Reversible motor. Features both Rewind and Unwind. • Variable speed control allows user to choose comfortable rewind speed. • Long-range (over 500 ft. range) pocket-sized remote, operating on 340 MHz band. • Adjustable brake prevents hose creep during transit. • Standard inlet: 90° ball bearing swivel joint, 1/2" female NPT threads. • Standard outlet: 1/2" female NPT. Optional outlet: 3/8” female NPT or 3/4” male GHT (garden thread). Must specify outlet when ordering. • Pressures to 3000 psi (207 bar). • Temperatures from +32° F to +400° F (0° C to +204° C). • Chain guard is standard. • No electromechanical components that can break (relays, solenoids, circuit breakers). Simple direct wiring directly to motor and battery. • Overcurrent and under-voltage protection are all built into the electronics. • Remote transmitter is uniquely paired with base receiver to prevent interference.

  • View Cart
    Details

    Series SF / SBSF

    To handle single 3/4" or 1" I.D. hose.

    • Inboard motor location high profile. • Standard booster hose reel is steel, painted graphite. Aluminum or stainless steel construction is also available. • Super Booster (SBSF) polished aluminum construction reel weighs up to 30% less than standard booster reel. Prefix complete model number with "SB" when ordering. See Note 6 on page 9. • Choose chain and sprocket rewind powered by either electric or compressed air motor. • Pinion brake standard. • Standard inlet: 1" 90° ball bearing swivel joint with 1" female NPT threads. • Standard outlet: 1" male NST threads (1.375" x 8 threads per inch). • Consult factory for other sizes and/or threads. • Standard inlet, outlet riser, and hub assembly are steel (also available in stainless steel). • Rollers and roller mounting brackets are accessory items. Specify roller position. • Pressures to 1000 psi (69 bar). • Temperatures from -40° F to +400° F (-40° C to +204° C). • Consult factory for other pressures and temperatures.

  • Series SNC
    View Cart
    Details

    Series SNC

    To handle single 3/8" through 5/8" I.D. hose.

    • Lightweight, low-profile reels designed for hose lengths up to 500 ft. • Primarily 304 SST construction, including discs, axle hub, and welded frame. • Non-SST components: Drum (Aluminum), Swivel Joint and Bearings (Plated). • Manual (direct crank) reels include both pin lock and 3-position cam-lock drag brake. • Electric rewind reels (denoted by letter ‘E’ at end of model) feature plated chain/sprocket drive with guard. • Standard inlet: 90° full-flow swivel, 1/2" FNPT threads. Standard outlet: 1/2" FNPT threads. • Standard pressure rated to 3000 psi (207) bar. Higher pressures available, consult factory.

  • Series SPBN800
    View Cart
    Details

    Series SPBN800 / SPB800

    To handle 3/4" or 1" I.D. hose.

    • Standard hose reel is steel construction, painted graphite. Stainless steel construction is available. • SPB800 only: Aluminum construction is also available. “SB” prefix denotes polished aluminum construction, offering both reduced weight and superior corrosion resistance compared to standard steel construction. • Rollformed frame for heavy-duty applications must be specified. • Non-sparking ratchet locks reel, and declutching arbor prevents damage from reverse winding. • Standard inlet: 90° ball bearing swivel joint, 1" female NPT threads. Standard outlet: 1" female NPT threads. Other sizes and/or threads can be furnished and must be specified. • Pressures to 350 psi (24 bar). Temperatures from -40°F to +350°F (-40°C to +177°C). Consult factory for other pressures and temperatures. • Supplied 4-way roller assembly. Specify roller position.

  • Series SS1000
    View Cart
    Details

    Series SS1000

    To handle single 1/4" or 3/8" I.D. hose.

    • Lightweight, compact • Direct crank rewind permanently attached. • Adjustable cam-lock brake standard. • Optional pin lock available. • Standard inlet: 90° stainless steel ball bearing swivel joint, 1/2" female NPT threads. • Standard outlet: 3/8" female NPT threads. • Pressures to 3000 psi (207 bar). • Temperatures from +32° F to +400° F (0° C to +204° C). • Consult factory for other pressures and temperatures. • 304 stainless steel construction.

  • Series SS1500
    View Cart
    Details

    Series SS1500

    To handle single 3/8" through 5/8" I.D. hose.

    • Lightweight, compact reels designed for long lengths of hose. • Manual rewind includes: cam-lock drag brake, spring actuated pin lock and direct crank rewind. • Standard inlet: 90° stainless steel ball bearing swivel joint, 1/2" female NPT threads. • Standard outlet: 1/2" female NPT threads. • Rollers and roller mounting brackets are accessory items. Specify roller position. • Pressures to 3000 psi (207 bar). • Temperatures from +32° F to +400° F (0° C to +204° C). • Consult factory for other pressures and temperatures. • Consult factory for power version. • 304 stainless steel construction.

  • Series SS1800
    View Cart
    Details

    Series SS1800

    To handle single 5/8" or 3/4" I.D. hose.

    • Lightweight, compact reels designed for long lengths of hose. • Manual rewind includes: cam-lock drag brake, spring actuated pin lock and direct crank rewind. • Standard inlet: 90° stainless steel ball bearing swivel joint, 1" female NPT threads. • Standard outlet: 3/4" female NPT threads. • Rollers and roller mounting brackets are accessory items. Specify roller position. • Pressures to 1000 psi (69 bar). • Standard temperatures from -65° F to +250° F (-54° C to +121° C), optional temperatures to +400°F (+204°C) – must specify. • Consult factory for other pressures and temperatures. • 304 stainless steel construction.

  • Series SS3000
    View Cart
    Details

    Series SS3000

    To handle 3/4" or 1" I.D. hose.

    • Economical manual rewind reels for long lengths of hose. • Choose disc rewind or removable direct crank rewind. • Supplied with spring-actuated pin lock. • Standard inlet: 90° stainless steel ball bearing swivel joint, 1" female NPT threads. • Standard outlet: 1" female NPT thread. • Rollers and roller mounting brackets are accessory items. Specify roller position. • Pressures to 1000 psi (69 bar). • Standard temperatures from -65° F to +250° F (-54° C to +121° C), optional temperatures to +400°F (+204°C) – must specify. • Consult factory for other pressures and temperatures. • Consult factory for power reels for 1" hose. • 304 stainless steel construction.

  • Series SS4000
    View Cart
    Details

    Series SS4000

    To handle single 3/4" or 1" I.D. hose.

    • Lightweight, compact reels designed for long lengths of hose. • Manual rewind includes: cam-lock drag brake, spring actuated pin lock and removable direct crank rewind. • Standard inlet: 90° stainless steel ball bearing swivel joint, 1" female NPT threads. • Standard outlet: 1" female NPT threads. • Rollers and roller mounting brackets are accessory items. Specify roller position. • Pressures to 1000 psi (69 bar). • Standard temperatures from -65° F to +250° F (-54° C to +121° C), optional temperatures to +400°F (+204°C) – must specify. • Consult factory for other pressures and temperatures. • 304 stainless steel construction.

  • Series SS800
    View Cart
    Details

    Series SS800

    To handle 3/4" or 1" I.D. hose.

    • Roll-formed channel frame for heavy-duty applications. • Non-sparking ratchet assembly. • Declutching arbor to prevent damage from reverse winding. • Standard inlet: 90° stainless steel ball bearing swivel joint, 1" female NPT threads. • Standard outlet: 1" female NPT threads. • Pressures to 1000 psi (69 bar). • Standard temperatures from -65° F to +250° F (-54° C to +121° C), optional temperatures to +400°F (+204°C) – must specify. • Consult factory for other pressures and temperatures. • 4-way roller assembly. • Constant tension is available – consult factory. • 304 stainless steel construction.

  • Series SSN700
    View Cart
    Details

    Series SSN700

    To handle 1/4" through 1/2" I.D. hose.

    • Narrow frame and compact mounting base. • Non-sparking ratchet assembly. • Declutching arbor to prevent damage from reverse winding. • Standard inlet: 90° stainless steel ball bearing swivel joint, 1/2" female NPT threads. • Standard outlet: 1/2" female NPT threads. • Standard pressures to 3000 psi (207 bar). • Temperatures from +32° F to +400° F (0° C to +204° C). • Consult factory for other pressures and temperatures. • 4-way roller assembly. • Constant tension is available – consult factory. • 304 stainless steel construction. • Optional SST Mosmatic ½" balanced pressure swivel joint available, subtract 1.50" from “F” dimension, specify when ordering.

Go to Top